Skip to content
3M Wrap Film Series 2080: Tips and Tricks

3M Wrap Film Series 2080: Tips and Tricks

3M Wrap Film Series 2080 gloss films have a conformable Protective Film Layer over the top film surface. Benefits include:

  • Reduced surface impressions during installation*
  • Can be removed and cleaned easily
  • Protects against impressions and scratches
  • Will not transfer to wrap film
  • Conforms to wrap complexly curved body panels without removing protective film layer
  • Easier installation due to lowered surface friction

When finishing around corners and panel edges, peel the Protective Film Layer back several inches before tucking and performing normal finishing.

*Surface impressions are commonly known as hazing, blotchy and mottled appearances on gloss film.

 

Tips & Tricks:

2080 is more conformable than the previous 1080, enabling easier installation with less heat.

  • For best results with 2080, do not overstretch material when conforming around curvature.
  • Do not use a torch during installs. Heat guns are far less likely to haze or damage the material’s surface or gloss level. If hazing occurs, use a heat gun to bring the film back to its original gloss level.
  • Use a slip solution for best results during installation (ex. PPF Installation Gel or a mixture of mild detergent and water)
  • Post-heat wrap thoroughly after installation to prevent the material from lifting over time.

    Previous article 3M Tools You Need In Your Shop
    Next article Step Up Your Look With 3M's 2080 Cover Chrome